How to sharpen Edgetac single-bevel broadheads?
May 8, 2022
There are a lot of sharpening tools and contraptions out there.
The KME broadhead jig is an example of a contraption which does not work well with Edgetac broadheads.
Everything you’ll need is listed below and usually available on Amazon.
What works best for Edgetac broadheads is using the following Youtube video as a guide:
https://www.youtube.com/watch?v=drHl4q1Id7Y
And use these two sharpening stones, first the 600, then the 1200:
1. UltraSharp D38F-600 Grit Diamond Sharpening Stone
2. UltraSharp D38E-1200 Grit Diamond Sharpening Stone
Then use this video as a guide:
https://www.youtube.com/watch?v=-Rh2IpKnJKE
and strop the broadhead using the following strop:
3. KNIVES PLUS Strop Block, Leather Sharpening Strop, 8 Long
Recommended hand protection:
4. Nitrile or similar gloves
Optional:
5, Original Krud Kutter Concentrated Cleaner/Degreaser – 32 oz
(used on the Diamond stone as a lubricant instead of water)
6. Bar Keepers Friend Soft Cleanser – 13 oz
(used to clean the Diamond stone after use)
4
0
