How Can We Help?
< All Topics

How to sharpen Edgetac single-bevel broadheads?

There are a lot of sharpening tools and contraptions out there.

The KME broadhead jig is an example of a contraption which does not work well with Edgetac broadheads.
Everything you’ll need is listed below and usually available on Amazon.

What works best for Edgetac broadheads is using the following Youtube video as a guide:

And use these two sharpening stones, first the 600, then the 1200:

1. UltraSharp D38F-600 Grit Diamond Sharpening Stone
2. UltraSharp D38E-1200 Grit Diamond Sharpening Stone

Then use this video as a guide:

and strop the broadhead using the following strop:

3. KNIVES PLUS Strop Block, Leather Sharpening Strop, 8 Long

Recommended hand protection:
4. Nitrile or similar gloves

5, Original Krud Kutter Concentrated Cleaner/Degreaser – 32 oz
(used on the Diamond stone as a lubricant instead of water)
6. Bar Keepers Friend Soft Cleanser – 13 oz
(used to clean the Diamond stone after use)

Table of Contents